DIY - Tự cấu hình chức năng options của BMW và Chuẩn đoán kỹ như vào hãng

soluon

Xe máy
Biển số
OF-334795
Ngày cấp bằng
15/9/14
Số km
97
Động cơ
279,970 Mã lực
Tình hình là đua đòi các bác nước ngoài coding được nhiều thứ hay quá. Mấy tuần rồi phê vật tìm hiểu cách coding cho con X5 e70 nhà em. Cuối cùng đã tìm ra được cách coding ngon - bổ - rẻ - đơn giản tự làm ở nhà được...hihihi và đã lôi con e70 nhà em ra làm chuột bạch và coding thành công. Nay chia sẻ lại kinh nghiệm cho các bác hội nhà Bim để nghịch....

Yêu cầu:
- Máy tính bảng hoặc điện thoại chạy Android
- Cục OBD2 bluetooth (mua ở trên mạng chắc cỡ 200k đến 500k à)
- Phần mềm BMWhat v14.55 - phiên bản cao hơn thì càng tốt... (các bác tự download đi nhé)...cài đặt bình thường

Cách làm:

Chuẩn bị
a- Cắm cục OBD vào cổng OBD2 ở trên xe (thường ở dưới tablo)
b- Kết nối máy tính bảng hoặc điện thoại với củ bluetooth OBD
c- Bật điện (không cần nổ máy nhé)

Cấu hình phần mềm
c- Mở phần mềm BMWhat
d- Chưa kết nối (connect) gì, vào chọn model xe của mình. Ví dụ con X5 nhà em là X5 3.0 si động cơ N32B30O1
e- Vào settings: đặt lại thành normal communication, normal connection, normal Comm Speed

Bắt đầu config:

f- Về home
g- Ấn chọn Bluetooth và sau đó ấn Connect --> Phần mềm phải báo connection OK
h- Vào phần Coding: Ấn vào Check compability (kiểm tra tương thích)
i- BMWhat sẽ báo xem đã liên lạc được với những bộ ECUs nào để cấu hình, như xe của em thì nó lên các ECU sau: CAS, FRM, KOMBI, ....06 bộ liền, chả nhớ tên nữa....
j- Hhihihi các bác đã sẵn sàng để coding cho hàng trăm options đã có sẵn của BMW mà thường phải trả tiền khi mua xe mới :-|:-|:-|. Ví dụ như sau:
+ Để đặt chế độ Comfort Close: Đóng cửa sổ, cửa nóc khi giữ phím Lock: vào phần module CAS -> chọn READ cấu hình để BMWhat tự backup lại -> chọn phần Comfort close -> chọn active -> ấn nút config -> đánh dấu vào ô Đồng ý với cảnh báo -> OK. Tiếp đó BMWhat sẽ config lại cấu hình -> Xong thì OK -> sau đó tắt điện và khởi động động cơ lại một lần thì cấu hình mới sẽ được active.

Lưu ý:
- Em không chịu trách nhiệm nhá...
- Thường thì Bluetooth trao đổi thông tin bằng sóng nên cũng có thể có lỗi. Các bác nên ngồi gần cái cục Bluetooth OBD lúc lập trình để sóng nó khỏe nhé...Lúc lập trình nhớ tắt sóng các loại khách đi như Wifi, GSM, 3G (flight mode), chỉ bật mỗi Bluetooth lên thôi...

Thôi mệt rồi...lúc khác viết tiếp, mà có khi các bác tự mò phần diagnostic đi nhé. Báo thông số cụ tỷ cụ tì cho 54 bài test kiểm tra hàng trăm thông số để các bác biết mà kiểm tra, điều chỉnh xe cho yên tâm mà chạy....

Thân mến
 
Chỉnh sửa cuối:

sondong

Xe điện
Biển số
OF-85751
Ngày cấp bằng
18/2/11
Số km
2,796
Động cơ
436,993 Mã lực
Khoá xe tự động lên kính có không cụ?
 

soluon

Xe máy
Biển số
OF-334795
Ngày cấp bằng
15/9/14
Số km
97
Động cơ
279,970 Mã lực
Có đấy, lúc khóa xe thì giữ phím thì lên luôn...

Ơ mà attach file ở đâu ấy nhỉ??
 

soluon

Xe máy
Biển số
OF-334795
Ngày cấp bằng
15/9/14
Số km
97
Động cơ
279,970 Mã lực
BMWhat coding Guide
CAS: Comfort start
active
not active
BMWhat: Ignition key just has to be tapped once to start the engine after ignition is turned on.
CAS: Comfort eject
active
not active
BMWhat: Ignition key is automatically ejected, when ignition is turned off.
CAS: Comfort open using remote
active
not active
BMWhat: Press and hold the unlock button on the remote to open all windows and the sunroof. Convertibles open the roof instead. CAS: Comfort close using remote
active
not active
BMWhat: Press and hold the lock button on the remote to close all windows and the sunroof.
CAS: Comfort open using keylocks
active
not active
BMWhat: Unlock the car by key and hold the key in the unlock position to open all windows and the sunroof. Convertibles open the roof instead.
CAS: Comfort close using keylocks
active
not active
BMWhat: Lock the car by key and hold the key in the lock position to close all windows and the sunroof. Convertibles close the roof instead.
CAS: Comfort folding/unfolding for sideview mirrors
active
not active
BMWhat: When holding the lock/unlock button on the remote the sideview mirrors automatically fold/unfold. To activate this function please activate "Comfort
folding/unfolding for sideview mirrors" in the "FRM" module.
CAS: Power windows after ignition off
active
not active
BMWhat: Power windows are active for another minute after ignition is turned off. CAS: Power windows after ignition off duration
1 min
2 min
5 min
10 min
15 min
BMWhat: Duration in minutes, for which power windows are active after turning off the ignition.
CAS: Easy entry
active
not active
BMWhat: Press the unlock button once to unlock all doors. Press it again to lower the driver side window.
CAS: Easy entry Key 1
active
not active
BMWhat: Separate setting for "Easy entry" for key 1. Press the unlock button once to unlock all doors. Press it again to lower the driver side window.
CAS: Easy entry Key 2
active
not active
BMWhat: Separate setting for "Easy entry" for key 2. Press the unlock button once to unlock all doors. Press it again to lower the driver side window.
CAS: Easy entry Key 3
active
not active
BMWhat: Separate setting for "Easy entry" for key 3. Press the unlock button once to unlock all doors. Press it again to lower the driver side window.
CAS: Easy entry Key 4
active
not active
1
BMWhat: Separate setting for "Easy entry" for key 4. Press the unlock button once to unlock all doors. Press it again to lower the driver side window.
CAS: Selective central locking
active
not active
BMWhat: Unlocking the car once only unlocks the driver"s door. Unlocking it again unlocks the other doors, too.
CAS: Selective central locking Key 1
active
not active
BMWhat: Separate setting for "Selective central locking" for key 1. Unlocking the car once only unlocks the driver"s door. Unlocking it again unlocks the other doors, too.
CAS: Selective central locking Key 2
active
not active
BMWhat: Separate setting for "Selective central locking" for key 2. Unlocking the car once only unlocks the driver"s door. Unlocking it again unlocks the other doors, too.
CAS: Selective central locking Key 3
active
not active
BMWhat: Separate setting for "Selective central locking" for key 3. Unlocking the car once only unlocks the driver"s door. Unlocking it again unlocks the other doors, too.
CAS: Selective central locking Key 4
active
not active
BMWhat: Separate setting for "Selective central locking" for key 4. Unlocking the car once only unlocks the driver"s door. Unlocking it again unlocks the other doors, too.
CAS: Selective central locking - unlock fuel lid active
not active
BMWhat: The fuel lid is also unlocked upon the first unlock, when "Selective central
locking" is active.
CAS: Lock tailgate when car locked
active
not active
BMWhat: Tailgate cannot be unlocked, when car is locked.
CAS: Automatically lock vehicle duration
1 min
2 min
5 min
10 min
15 min
BMWhat: Duration in minutes until doors are locked after car was unlocked but no windows or doors have been opened.
CAS: Automatically lock vehicle Key 1
active
not active
BMWhat: Separate setting for "Automatically lock vehicle" for key 1. If no door or window has been opened two minutes after the car has been unlocked, the doors automatically lock.
CAS: Automatically lock vehicle Key 2
active
not active
BMWhat: Separate setting for "Automatically lock vehicle" for key 2. If no door or window has been opened two minutes after the car has been unlocked, the doors automatically lock.
CAS: Automatically lock vehicle Key 3
active
not active
BMWhat: Separate setting for "Automatically lock vehicle" for key 3. If no door or window has been opened two minutes after the car has been unlocked, the doors automatically lock.
CAS: Automatically lock vehicle Key 4
active
not active
BMWhat: Separate setting for "Automatically lock vehicle" for key 4. If no door or window has been opened two minutes after the car has been unlocked, the doors automatically lock.
2
CAS: Lock vehicle upon ignition
active
not active
BMWhat: Vehicle is locked, when ignition is turned on.
CAS: Unlock car when turned off
active
not active
BMWhat: Doors are automatically unlocked, when ignition key is ejected. Only works if "Lock vehicle at x kph Key 1-4" is activated. CAS: Threshold speed for vehicle locking
2 kph
6 kph
12 kph
18 kph
24 kph
30 kph
BMWhat: Sets the speed at which the vehicle automatically locks all doors. For models other than E46 values 1 to 6 mean the following: 4 kph, 8kph, 12 kph, 20 kph, 24 kph, 28 kph To activate this option you need to activate "Lock vehicle at x kph" for the according keys.
CAS: Lock vehicle at x kph Key 1
active
not active
BMWhat: Automatically lock the vehicle at the set threshold speed when key 1 is used. CAS: Lock vehicle at x kph Key 2
active
not active
BMWhat: Automatically lock the vehicle at the set threshold speed when key 2 is used. CAS: Lock vehicle at x kph Key 3
active
not active
BMWhat: Automatically lock the vehicle at the set threshold speed when key 3 is used. CAS: Lock vehicle at x kph Key 4
active
not active
BMWhat: Automatically lock the vehicle at the set threshold speed when key 4 is used. CAS: Interior lights with remote
active
not active
BMWhat: Pressing the lock button on the remote, when the car is already locked, turns on the interior lights.
CAS: Panic mode remote
active
not active
BMWhat: Press and hold the "unlock trunk" button to trigger the alarm.
CAS: Unlock rear window
active
not active
BMWhat: Key unlocks rear window instead of trunk lid in touring models.
CAS: Unlock rear window key 1
active
not active
BMWhat: Key 1 unlocks rear window instead of trunk lid in touring models.
CAS: Unlock rear window key 2
active
not active
BMWhat: Key 2 unlocks rear window instead of trunk lid in touring models.
CAS: Unlock rear window key 3
active
not active
BMWhat: Key 3 unlocks rear window instead of trunk lid in touring models.
CAS: Unlock rear window key 4
active
not active
BMWhat: Key 4 unlocks rear window instead of trunk lid in touring models.
CAS: Unlock rear window with outside trunk lid button
active
not active
BMWhat: Outside trunk lid button opens rear window instead of trunk lid in touring models.
CAS: Unlock rear window with outside trunk lid button Key 1
active
not active
BMWhat: Outside trunk lid button opens rear window instead of trunk lid in touring
3
models. Separate setting for key 1.
CAS: Unlock rear window with outside trunk lid button Key 2
active
not active
BMWhat: Outside trunk lid button opens rear window instead of trunk lid in touring models. Separate setting for key 2.
CAS: Unlock rear window with outside trunk lid button Key 3
active
not active
BMWhat: Outside trunk lid button opens rear window instead of trunk lid in touring models. Separate setting for key 3.
CAS: Unlock rear window with outside trunk lid button Key 4
active
not active
BMWhat: Outside trunk lid button opens rear window instead of trunk lid in touring models. Separate setting for key 4.
CAS: Unlock rear window with footwell switch
active
not active
BMWhat: Footwell switch opens rear window instead of trunk lid in touring models.
CAS: Unlock rear window with footwell switch Key 1
active
not active
BMWhat: Footwell switch opens rear window instead of trunk lid in touring models. Separate setting for key 1.
CAS: Unlock rear window with footwell switch Key 2
active
not active
BMWhat: Footwell switch opens rear window instead of trunk lid in touring models. Separate setting for key 2.
CAS: Unlock rear window with footwell switch Key 3
active
not active
BMWhat: Footwell switch opens rear window
instead of trunk lid in touring models. Separate setting for key 3.
CAS: Unlock rear window with footwell switch Key 4
active
not active
BMWhat: Footwell switch opens rear window instead of trunk lid in touring models. Separate setting for key 4.
CAS: Prohibit engine start without brake active
not active
BMWhat: Engine can"t be started when brake is not pressed.
CAS: Arm/Disarm Anti-Theft Alarm System Only with remote
With locks and remote
BMWhat: Anti-theft alarm system is armed/disarmed by locking/unlocking the car (1) with the locks and the remote or (2) only by locking/unlocking the car with the remote.
IHKA: Save circulation settings Key 1
active
not active
BMWhat: Circulation settings are saved for next start of the vehicle. Separate setting for key 1.
IHKA: Save circulation settings Key 2
active
not active
BMWhat: Circulation settings are saved for next start of the vehicle. Separate setting for key 2.
IHKA: Save circulation settings Key 3
active
not active
BMWhat: Circulation settings are saved for next start of the vehicle. Separate setting for key 3.
IHKA: Save circulation settings Key 4
active
not active
BMWhat: Circulation settings are saved for next start of the vehicle. Separate setting for key 4.
IHKA: Off-Mode Memory Key 1
4
active
not active
BMWhat: Save setting for "Off-mode" for the air conditioning. Separate setting for key 1. IHKA: Off-Mode Memory Key 2
active
not active
BMWhat: Save setting for "Off-mode" for the air conditioning. Separate setting for key 2. IHKA: Off-Mode Memory Key 3
active
not active
BMWhat: Save setting for "Off-mode" for the air conditioning. Separate setting for key 3. IHKA: Off-Mode Memory Key 4
active
not active
BMWhat: Save setting for "Off-mode" for the air conditioning. Separate setting for key 4. IHKA: Air conditioning engine speed
active
not active
BMWhat: Increase idle engine speed when air conditioning is turned on.
IHKA: Automatic compressor with air conditioning Key 1
active
not active
BMWhat: When pressing the "Automatic" button for air conditioning, the air conditioning does not start by itself. Separate setting for key 1.
IHKA: Automatic compressor with air conditioning Key 2
active
not active
BMWhat: When pressing the "Automatic" button for air conditioning, the air conditioning does not start by itself. Separate setting for key 2.
IHKA: Automatic compressor with air conditioning Key 3
active
not active
BMWhat: When pressing the "Automatic" button for air conditioning, the air conditioning does not start by itself. Separate
setting for key 3.
IHKA: Automatic compressor with air conditioning Key 4
active
not active
BMWhat: When pressing the "Automatic" button for air conditioning, the air conditioning does not start by itself. Separate setting for key 4.
KOMBI: Digital speedometer
active
not active
BMWhat: Digital speedometer is displayed in dashboard. This option does not work with every model yet. If there is no digital speedometer available after coding this option, please set this option back to not active and send that log.
KOMBI: Digital speedometer correction active
not active
BMWhat: Active: corrected speed is displayed in dashboard Inactive: true speed is displayed in dashboard
KOMBI: Speedometer correction
active
not active
BMWhat: Active: corrected speed is displayed in dashboard Inactive: true speed is displayed in dashboard/nDoes not work on US models.
KOMBI: Speed limit warning
not active
120 kph
190 kph
210 kph
240 kph
BMWhat: Speed limit warning at 120 kph is active/not active.
KOMBI: GPS time correction
active
not active
BMWhat: Time of day is corrected by using GPS.
KOMBI: Blank line in dashboard
active
not active
5
BMWhat: Blank line in dashboard is displayed/not displayed.
KOMBI: Permanent speedometer lighting active
not active
BMWhat: Speedometer is always lit, even in the daytime.
KOMBI: Ignition key warning
active
not active
BMWhat: Ignition key warning active/not active.
KOMBI: Cruise Control speed display
0s
3s
6s
BMWhat: The set speed of the cruise control is shown for a couple of seconds in the on board computer.
FRM: Flasher with bi-xenon
active
not active
BMWhat: Bi-xenon lamps are used for flasher.
FRM: Front fog lights and high beams not simultaneously
active
not active
BMWhat: Front fog lights are automatically turned off when activating high beams.
FRM: Front fog lights and flasher not simultaneously
active
not active
BMWhat: Front fog lights are automatically turned off when activating flasher.
FRM: Turn off interior lighting after 2 minutes
active
not active
BMWhat: Interior lighting is automatically turned off after two minutes.
FRM: Soft turn on/off for interior lighting active
not active
BMWhat: Interior lighting is softly turned on and off.
FRM: Optical confirmation for unlocking vehicle
active
not active
BMWhat: Optical confirmation for unlocking vehicle is active/not active.
FRM: Optical confirmation for unlocking vehicle Key 1
active
not active
BMWhat: Optical confirmation for unlocking vehicle is active/not active. Separate setting for "Optical confirmation for unlocking" for key 1.
FRM: Optical confirmation for unlocking vehicle Key 2
active
not active
BMWhat: Optical confirmation for unlocking vehicle is active/not active. Separate setting for "Optical confirmation for unlocking" for key 2.
FRM: Optical confirmation for unlocking vehicle Key 3
active
not active
BMWhat: Optical confirmation for unlocking vehicle is active/not active. Separate setting for "Optical confirmation for unlocking" for key 3.
FRM: Optical confirmation for locking vehicle active
not active
BMWhat: Optical confirmation for locking vehicle is active/not active.
FRM: Optical confirmation for locking vehicle Key 1
active
not active
BMWhat: Optical confirmation for locking vehicle is active/not active. Separate setting for "Optical confirmation for locking" for key 1.
FRM: Optical confirmation for locking vehicle Key 2
active
not active
6
BMWhat: Optical confirmation for locking vehicle is active/not active. Separate setting for "Optical confirmation for locking" for key 2.
FRM: Optical confirmation for locking vehicle Key 3
active
not active
BMWhat: Optical confirmation for locking vehicle is active/not active. Separate setting for "Optical confirmation for locking" for key 3.
FRM: One-touch turn signal function
1
3
5
BMWhat: Number of turn signals when tapping the turn signal.
FRM: One-touch turn signal function Key 1
1
3
5
BMWhat: Number of turn signals when tapping the turn signal. Separate setting for "One-touch turn signal function" for key 1 FRM: One-touch turn signal function Key 2
1
3
5
BMWhat: Number of turn signals when tapping the turn signal. Separate setting for "One-touch turn signal function" for key 2. FRM: One-touch turn signal function Key 3
1
3
5
BMWhat: Number of turn signals when tapping the turn signal. Separate setting for "One-touch turn signal function" for key 3. FRM: Continue window function when door is opened
active
not active
BMWhat: When the door is opened while its window is opening/closing, the window will continue opening/closing the window.
FRM: Mirror tilt 1/2
active
not active
BMWhat: Requirement for mirror tilt functions.
FRM: Mirror tilt 2/2
active
not active
BMWhat: Requirement for mirror tilt functions.
FRM: Comfort folding/unfolding for sideview mirrors
active
not active
BMWhat: When holding the lock/unlock button on the remote the sideview mirrors automatically fold/unfold. May need additional coding of the "CAS" module.
FRM: Tilt mirror in reverse
active
not active
BMWhat: This function requires an installed LIN-Bus. Passenger mirror is tilted when switching into reverse gear. To activate this option activate "Mirror tilt", aswell.
FRM: Daytime running lights (Europe)
active
not active
BMWhat: Daytime running lights (Europe) active/not active.
FRM: Daytime running lights (Europe) Key 1 active
not active
BMWhat: Daytime running lights (Europe) active/not active. Separate setting for "Daytime running lights (Europe)" for key 1 FRM: Daytime running lights (Europe) Key 2 active
not active
BMWhat: Daytime running lights (Europe) active/not active. Separate setting for "Daytime running lights (Europe)" for key 2. FRM: Daytime running lights (Europe) Key 3 active
not active
BMWhat: Daytime running lights (Europe) active/not active. Separate setting for "Daytime running lights (Europe)" for key 3.
7
FRM: Angel eyes brightness daytime running lights
off
very low
low
rather low
medium
rather high
high
very high
BMWhat: Brightness of Angel Eyes (Corona rings) for daytime running lights.
FRM: Angel eyes brightness standing lights off
very low
low
medium
high
very high
BMWhat: Brightness of Angel Eyes (Corona rings) for standing lights.
FRM: Angel eyes brightness parking lights
off
very low
low
medium
high
very high
BMWhat: Brightness of Angel Eyes (Corona rings) for parking lights.
FRM: Sidemarker (US)
active
not active
BMWhat: Sidemarkers are permanently active. May need additional "Sidemarker (US)" options set to "active" if available.
FRM: Sidemarker (US) brightness
off
low
medium
high
BMWhat: Brightness for "Sidemarker (US)". FRM: Daytime running lights (US)
active
not active
BMWhat: Use dimmed turn signals as daytime running lights. To activate this
option, set the brightness to bright or dark.
FRM: Daytime running lights customization
Off
Turn signals (US)
High beams
Corona-rings/Angel-eyes (EU)
BMWhat: Customization of the daytime running lights. For Corona-rings/Angel-eyes also activate "Daytime running lights (Europe)".
FRM: Daytime running lights - high beams active
not active
BMWhat: Use high beams as daytime running lights. To activate this option, set "Daytime running lights" to "High beams".
FRM: Daytime running lights - high beams brightness
low
medium
high
BMWhat: Brightness for "Daytime running lights high beams".
FRM: Activate follow me home lights
active
not active
BMWhat: Follow me home lights are active/not active.
FRM: Follow me home lights duration
off
40s
90s
150s
240s
BMWhat: Duration of follow me home lights in seconds. To activate follow me home lights, activate the flasher, while the enginge is off. FRM: Follow me home lights duration Key 1 off
40s
90s
150s
240s
BMWhat: Separate setting for duration in seconds of follow me home lights for key 1. FRM: Follow me home lights duration Key 2 off
8
40s
90s
150s
240s
BMWhat: Separate setting for duration in seconds of follow me home lights for key 2. FRM: Follow me home lights duration Key 3 off
40s
90s
150s
240s
BMWhat: Separate setting for duration in seconds of follow me home lights for key 3. FRM: Cancel follow me home lights
active
not active
BMWhat: Follow me home lights are cancelled, when activating the flasher again. FRM: Extend follow me home lights
active
not active
BMWhat: Follow me home lights are displayed longer, when activating the flasher again.
FRM: Welcome lights
active
not active
BMWhat: Welcome lights are turned on, when vehicle is unlocked. In order for the welcome light to work, the light switch in the car has to be set to "Auto".
FRM: Welcome lights Key 1
active
not active
BMWhat: Separate setting for "Welcome lights" for key 1.
FRM: Welcome lights Key 2
active
not active
BMWhat: Separate setting for "Welcome lights" for key 2.
FRM: Welcome lights Key 3
active
not active
BMWhat: Separate setting for "Welcome lights" for key 3.
FRM: Welcome lights Key 4
active
not active
BMWhat: Separate setting for "Welcome lights" for key 4.
FRM: Welcome lights duration
off
5s
10s
20s
40s
90s
BMWhat: Duration of the welcome lights in seconds.
FRM: Welcome lights - low beams
not active
turn on softly
turn on hard
BMWhat: Low beams are turned on with welcome lights.
FRM: Welcome lights - braking lights
not active
turn on softly
turn on hard
BMWhat: Braking lights are turned on with welcome lights.
FRM: Welcome lights - turn signals rear
not active
turn on softly
turn on hard
BMWhat: Turn signals rear are turned on with welcome lights. To activate this option you may need to additionally code "Sidemarker (US) brightness" to "very low" or higher.
FRM: Welcome lights - turn signals front
not active
turn on softly
turn on hard
BMWhat: Turn signals front are turned on with welcome lights. To activate this option you may need to additionally code "Sidemarker (US) brightness" to "very low" or higher.
FRM: Welcome lights - high beams
not active
turn on softly
9
turn on hard
BMWhat: High beams are turned on with welcome lights.
FRM: Welcome lights - number plate lighting not active
turn on softly
turn on hard
BMWhat: Number plate lights are turned on with welcome lights.
FRM: Welcome lights - rear fog lights
not active
turn on softly
turn on hard
BMWhat: Rear fog lights are turned on with welcome lights.
FRM: Welcome lights - front fog lights
not active
turn on softly
turn on hard
BMWhat: Front fog lights are turned on with welcome lights.
FRM: Welcome lights - corner LEDs
not active
turn on softly
turn on hard
BMWhat: Corner LEDs are turned on with welcome lights. Due to the way LEDs work, it is not possible to softly turn them on.
FRM: Welcome lights - parking lights front not active
turn on softly
turn on hard
BMWhat: Parking lights front are turned on with welcome lights.
FRM: Welcome lights - parking lights rear
not active
turn on softly
turn on hard
BMWhat: Parking lights rear are turned on with welcome lights.
FRM: Seatbelt Hand-Over passenger
active
not active
BMWhat: Automatic seatbelt hand-over for passenger is active/inactive.
FRM: Seatbelt Hand-Over driver
active
not active
BMWhat: Automatic seatbelt hand-over for driver is active/inactive.
FRM: Hazard lights
standard
double
BMWhat: Hazard lights blink once or twice. FRM: Crash lights
standard
double
BMWhat: Hazard lights blink once or twice upon an accident.
JBBF: Wiping interval standstill
3s
5s
BMWhat: Interval in seconds for windscreen wipers at standstill.
JBBF: Wiping interval rear window
not active
2s
4s
8s
12s
6s
BMWhat: Interval in seconds for windscreen rear window wipers.
JBBF: Complete wiping cycle
active
not active
BMWhat: Wiping cycle is completed, when ignition is turned off.
JBBF: Wipe delay after windowscreen cleaning
0.1s
0.3s
0.5s
0.7s
BMWhat: Windscreen wipers wipe 0.x seconds after windscreen is cleaned.
JBBF: Wipe delay after rear window cleaning 0.1s
0.3s
0.5s
0.7s
BMWhat: Rear window wipers wipe 0.x seconds after rear window is cleaned.
JBBF: Number of wipes after windscreen
10
cleaning
1
2
3
4
BMWhat: Number of wipes after windscreen is cleaned.
JBBF: Number of wipes after rear window cleaning
1
2
3
4
BMWhat: Number of wipes after rear window is cleaned.
JBBF: Head light cleaning
active
not active
BMWhat: Turn head light cleaning on/off. JBBF: Number of windscreen cleanings until headlight cleaning
3
5
7
BMWhat: Head lights are cleaner every 3rd, 5th, 7th or 9th time the windscreen is cleaned.
JBBF: Number of splashes for head lights
2
3
BMWhat: Number of splashes for cleaning the head lights.
JBBF: Length of splash for head lights
0.7s
1s
0.5s
BMWhat: Length of a single splash for head light cleaning.
JBBF: Delay between splashes for head lights 1.3s
1s
1.5s
BMWhat: Delay between splashes for head light cleaning.
 

soluon

Xe máy
Biển số
OF-334795
Ngày cấp bằng
15/9/14
Số km
97
Động cơ
279,970 Mã lực
Đây mới là các option đơn giản, ở xe em nó còn hiện nhiều lắm cơ...:)>-
 

huancao662

Xe tải
Biển số
OF-24235
Ngày cấp bằng
15/11/08
Số km
477
Động cơ
496,680 Mã lực
Tình hình là đua đòi các bác nước ngoài coding được nhiều thứ hay quá. Mấy tuần rồi phê vật tìm hiểu cách coding cho con X5 e70 nhà em. Cuối cùng đã tìm ra được cách coding ngon - bổ - rẻ - đơn giản tự làm ở nhà được...hihihi và đã lôi con e70 nhà em ra làm chuột bạch và coding thành công. Nay chia sẻ lại kinh nghiệm cho các bác hội nhà Bim để nghịch....

Yêu cầu:
- Máy tính bảng hoặc điện thoại chạy Android
- Cục OBD2 bluetooth (mua ở trên mạng chắc cỡ 200k đến 500k à)
- Phần mềm BMWhat v13.03 (các bác tự download đi nhé)...cài đặt bình thường

Cách làm:

Chuẩn bị
a- Cắm cục OBD vào cổng OBD2 ở trên xe (thường ở dưới tablo)
b- Kết nối máy tính bảng hoặc điện thoại với củ bluetooth OBD
c- Bật điện (không cần nổ máy nhé)

Cấu hình phần mềm
c- Mở phần mềm BMWhat
d- Chưa kết nối (connect) gì, vào chọn model xe của mình. Ví dụ con X5 nhà em là X5 3.0 si động cơ N32B30O1
e- Vào settings: đặt lại thành normal communication, normal connection, normal Comm Speed

Bắt đầu config:

f- Về home
g- Ấn chọn Bluetooth và sau đó ấn Connect --> Phần mềm phải báo connection OK
h- Vào phần Coding: Ấn vào Check compability (kiểm tra tương thích)
i- BMWhat sẽ báo xem đã liên lạc được với những bộ ECUs nào để cấu hình, như xe của em thì nó lên các ECU sau: CAS, FRM, KOMBI, ....06 bộ liền, chả nhớ tên nữa....
j- Hhihihi các bác đã sẵn sàng để coding cho hàng trăm options đã có sẵn của BMW mà thường phải trả tiền khi mua xe mới :-|:-|:-|. Ví dụ như sau:
+ Để đặt chế độ Comfort Close: Đóng cửa sổ, cửa nóc khi giữ phím Lock: vào phần module CAS -> chọn READ cấu hình để BMWhat tự backup lại -> chọn phần Comfort close -> chọn active -> ấn nút config -> đánh dấu vào ô Đồng ý với cảnh báo -> OK. Tiếp đó BMWhat sẽ config lại cấu hình -> Xong thì OK -> sau đó tắt điện và khởi động động cơ lại một lần thì cấu hình mới sẽ được active.

Lưu ý:
- Em không chịu trách nhiệm nhá...
- Thường thì Bluetooth trao đổi thông tin bằng sóng nên cũng có thể có lỗi. Các bác nên ngồi gần cái cục Bluetooth OBD lúc lập trình để sóng nó khỏe nhé...Lúc lập trình nhớ tắt sóng các loại khách đi như Wifi, GSM, 3G (flight mode), chỉ bật mỗi Bluetooth lên thôi...

Thôi mệt rồi...lúc khác viết tiếp, mà có khi các bác tự mò phần diagnostic đi nhé. Báo thông số cụ tỷ cụ tì cho 54 bài test kiểm tra hàng trăm thông số để các bác biết mà kiểm tra, điều chỉnh xe cho yên tâm mà chạy....

Thân mến
Hay đấy cụ, đánh dấu cái nghiên cứu sau
 

Dang Vu

Xe tải
Biển số
OF-332852
Ngày cấp bằng
26/8/14
Số km
268
Động cơ
283,247 Mã lực
Đây mới là các option đơn giản, ở xe em nó còn hiện nhiều lắm cơ...:)>-
Bác có file pdf gửi giúp em vào email : vhdangiop@gmail.com, đang tìm cái hướng dẫn remote cụp gương/mở gương cho X1 chưa được, chỉ có kéo kính or hạ kính khi bấm giữ lock/unlock ở key remote thôi. Tks bác trước
 

bangviet2001

Xe máy
Biển số
OF-324477
Ngày cấp bằng
22/6/14
Số km
89
Động cơ
288,290 Mã lực
hay quá.cám ơn bác.sẽ đấnh dấu và nghiên cứu..
 

soluon

Xe máy
Biển số
OF-334795
Ngày cấp bằng
15/9/14
Số km
97
Động cơ
279,970 Mã lực
Bác có file pdf gửi giúp em vào email : vhdangiop@gmail.com, đang tìm cái hướng dẫn remote cụp gương/mở gương cho X1 chưa được, chỉ có kéo kính or hạ kính khi bấm giữ lock/unlock ở key remote thôi. Tks bác trước
Bác vào chỗ này, chọn tab X1 nhé
http://www.ivini-apps.com/coding.html#tab5

Bác muốn làm cụp gương thì phải làm active ở 2 module CAS và FRM đều có phần comford folding mirror đấy:

CAS: Comfort folding/unfolding for sideview mirrors
active
not active
BMWhat: When holding the lock/unlock button on the remote the sideview mirrors automatically fold/unfold. To activate this function please activate "Comfort folding/unfolding for sideview mirrors" in the "FRM" module.

FRM: Comfort folding/unfolding for sideview mirrors
active
not active
BMWhat: When holding the lock/unlock button on the remote the sideview mirrors automatically fold/unfold. May need additional coding of the "CAS" module.

:-|:-|:-| chúc thành công....
 
Chỉnh sửa cuối:

Son.Hoang

Xe tăng
Biển số
OF-314035
Ngày cấp bằng
31/3/14
Số km
1,187
Động cơ
929,567 Mã lực
Em hơi confuse một chút, nếu như bác mô tả thì là Setting các functionality của nó chứ có phải là coding đâu ạ, dẫu sao nó là vô cùng bổ ích cho hội BIM.
 

soluon

Xe máy
Biển số
OF-334795
Ngày cấp bằng
15/9/14
Số km
97
Động cơ
279,970 Mã lực
Hì hì,

Để khoe các cụ xe em đã bật được những options gì này...các cụ cũng khoe xem xe các bác đã làm được gì cho xôm nhé.

Xe: X5 E70 pre-LCI 3.0si

1. Đóng mở cửa sổ, cửa nóc khi giữ phím lock ở remote (CAS - comford close). Nhỡ có nghịch mở cửa nóc nó thì đỡ bị quên...Xe em dán kính đen xì chả nhìn thấy bên trong nên thỉnh thoảng lại phải quay lại mở cửa xe ngó xem đã đóng cửa nóc chưa :-| không thì tối lo ngay ngáy không ngủ được. Giờ thì yên tâm roài...
2. Cụp gương bằng remote (CAS và FRM - comford fold/unfold) --> trước toàn phải quay lại đóng vì quên. Nay thì giữ phím lock là xong hết từ cửa nóc đến gương. Khi unlock thì lại tự xoè ra
3. Hiển thị tốc độ hiện thời bằng số trên màn hình TRIP, bật hiệu chỉnh TRUE Speed (tốc độ thật) (KOMBI - Digital speedometer và Speed correction) cho chính xác (lốp mòn, lốp mới cũng không ảnh hưởng gì đến tốc độ hiển thị. Cái này để cãi nhau với CSGT cho chuẩn hè hè...Mà cũng đỡ đi quá tốc độ nữa, chứ nhiều khi nhìn đồng hồ toàn đoán chừng tốc độ thôi...

Em dự làm tiếp thêm mấy chức năng sau:
1. Tự động quay gương bên phụ xuống một chút khi vào số lùi...để nhìn vỉa hè cho dễ, đỡ bị kẹt la răng vào vỉa hè xót ruột lắm :-| (FRM - Mirror Tilt 1/2, Morror Tilt 2/2, Mirror tilt in reverse)
2. Tự bật remote ra khi ấn tắt động cơ...bớt được một thao tác ấn tháo remote (CAS - comford ejects)
3. Đóng/Mở thuận tiện bằng chìa khoá (nhỡ khi remote hết pin) giống như remote (CAS - Comford key Open và Comford key close)
4. Hoàn tất chu kỳ cần gạt nước khi tắt máy...(JBBF - complete wiping cycle)
5. ...còn nhiều quá, để xem tiếp đã xem...

Bye các cụ...

À mà quên, để dặn các cụ lúc làm diagnostic thì phải nhớ bật động cơ, bật điều hoà lên nhé, không thì lại thấy lỗi Fault ở một số thứ đấy. Hôm qua em thử xoá lỗi, đọc lỗi thì mấy thứ như sensor chất lượng dầu, water valve,...CAN-Message,...báo lỗi không liên lạc được, nhưng đọc lại thì hoá ra mấy thứ này phải chạy động cơ thì nó mới hoạt động được...Mà nhiều thông số khiếp...
 

Son.Hoang

Xe tăng
Biển số
OF-314035
Ngày cấp bằng
31/3/14
Số km
1,187
Động cơ
929,567 Mã lực
Cụ chủ sướng thật đấy, như hồi sinh viên lập trình với các cảm biến ý.
 

soluon

Xe máy
Biển số
OF-334795
Ngày cấp bằng
15/9/14
Số km
97
Động cơ
279,970 Mã lực
Em hơi confuse một chút, nếu như bác mô tả thì là Setting các functionality của nó chứ có phải là coding đâu ạ, dẫu sao nó là vô cùng bổ ích cho hội BIM.
Cái thuật ngữ coding của Bim cũng củ chuối lắm...thật ra là toàn đặt lại các parameters (thông số), bật, tắt thôi....chứ không phải coding giống như lập trình C hay gì gì đâu bác ạ...hồi xưa em cũng khiếp cái từ coding lắm ...=P~ khi nghe các bác tiền bối doạ cứ ô a tròn cả mồm...
 
Chỉnh sửa cuối:

0979920000

Xe hơi
Biển số
OF-146349
Ngày cấp bằng
19/6/12
Số km
183
Động cơ
362,550 Mã lực
Oánh dấu fats. Khi nao có xe cái la thực hiện liền hehee
 

workshop

Xe buýt
Biển số
OF-73225
Ngày cấp bằng
18/9/10
Số km
545
Động cơ
430,142 Mã lực
Cái thuật ngữ coding của Bim cũng củ chuối lắm...thật ra là toàn đặt lại các parameters (thông số), bật, tắt thôi....chứ không phải coding giống như lập trình C hay gì gì đâu bác ạ...hồi xưa em cũng khiếp cái từ coding lắm ...=P~ khi nghe các bác tiền bối doạ cứ ô a tròn cả mồm...
Các tín hiệu mã hóa thuộc dạng tín hiệu nhị phân nó chỉ gồm hai trạng thái ON or OFF đương nhiên trông có vẻ đơn giản nhưng trong một chuỗi mã nhị phân bạn làm sao biết ON or OFF ở đâu ! ví dụ hai trạng thái của chuỗi mã nhị phân của một chiếc xe BMW đã được mã hóa để có thể xem DVD khi lái xe như sau
1 / 00300000,0010,78,00,F0,C1,21,C1,DC,81,01,00,03,06,04,F3,60,00
2 / 00300010,0010,D0,81,1D,46,00,00,E0,FF,FF,03,03,11,21,01,01,FF
3 / B 00300010,0010,50,81,1D,46,00,00,C0,03,03,03,03,11,11,01,01,FF
4 / B 00300010,0010,50,81,1D,46,00,00,C0,FF,FF,03,03,11,11,01,01,FF . Dòng (1 và 3) là trước khi mã hóa và dòng (2 và 4 ) là sau khi mã hóa.
Tất nhiên nó không chỉ đơn giản có vậy nên trước khi làm nó đều khuyến cáo performed backup original. Mà bạn nói đơn giản cũng đúng vì toàn do máy thực hiện./
 

soluon

Xe máy
Biển số
OF-334795
Ngày cấp bằng
15/9/14
Số km
97
Động cơ
279,970 Mã lực
Các tín hiệu mã hóa thuộc dạng tín hiệu nhị phân nó chỉ gồm hai trạng thái ON or OFF đương nhiên trông có vẻ đơn giản nhưng trong một chuỗi mã nhị phân bạn làm sao biết ON or OFF ở đâu ! ví dụ hai trạng thái của chuỗi mã nhị phân của một chiếc xe BMW đã được mã hóa để có thể xem DVD khi lái xe như sau
1 / 00300000,0010,78,00,F0,C1,21,C1,DC,81,01,00,03,06,04,F3,60,00
2 / 00300010,0010,D0,81,1D,46,00,00,E0,FF,FF,03,03,11,21,01,01,FF
3 / B 00300010,0010,50,81,1D,46,00,00,C0,03,03,03,03,11,11,01,01,FF
4 / B 00300010,0010,50,81,1D,46,00,00,C0,FF,FF,03,03,11,11,01,01,FF . Dòng (1 và 3) là trước khi mã hóa và dòng (2 và 4 ) là sau khi mã hóa.
Tất nhiên nó không chỉ đơn giản có vậy nên trước khi làm nó đều khuyến cáo performed backup original. Mà bạn nói đơn giản cũng đúng vì toàn do máy thực hiện./
Hai chuỗi trước và sau đều là mã đã dịch ra nhị phân của Biến (variables) cho thông số, trạng thái nào đó...ví dụ như ON, OFF.
-> về bản chất là chỉ thay đổi giá trị của Biến, không phải thay đổi Thuật toán, Lệnh (kiểu như: nếu gương chưa gập thì trong trường hợp dùng remote thì gập bên phải vào 45 độ...thì...em đố bác nào làm được đấy)
Việc coding ở mức thấp hơn với INPA, NCSExpert, v.v. đều cũng có diễn giải các biến này thành dạng dễ hiểu hơn để các bác sử dụng, không sai sót, mà thường bằng tiếng Đức. Để can thiệp thẳng vào mã nhị phân kiểu chuỗi như ở trên thì chả ai làm được ở VN, mà có làm được thì em cũng chả dám cho nghịch xe em vì QUÁ DỄ SAI SÓT, mà đã sai sót thì DỄ TÈO...
 

workshop

Xe buýt
Biển số
OF-73225
Ngày cấp bằng
18/9/10
Số km
545
Động cơ
430,142 Mã lực
Hai chuỗi trước và sau đều là mã đã dịch ra nhị phân của Biến (variables) cho thông số, trạng thái nào đó...ví dụ như ON, OFF.
-> về bản chất là chỉ thay đổi giá trị của Biến, không phải thay đổi Thuật toán, Lệnh (kiểu như: nếu gương chưa gập thì trong trường hợp dùng remote thì gập bên phải vào 45 độ...thì...em đố bác nào làm được đấy)
Việc coding ở mức thấp hơn với INPA, NCSExpert, v.v. đều cũng có diễn giải các biến này thành dạng dễ hiểu hơn để các bác sử dụng, không sai sót, mà thường bằng tiếng Đức. Để can thiệp thẳng vào mã nhị phân kiểu chuỗi như ở trên thì chả ai làm được ở VN, mà có làm được thì em cũng chả dám cho nghịch xe em vì QUÁ DỄ SAI SÓT, mà đã sai sót thì DỄ TÈO...
Đương nhiên là không thể thay đổi thuật toán được vì nó liên quan đến công nghệ gia công xử lý tín hiệu ! Bạn chỉ thay đổi trạng thái các biến đầu vào , có nghĩa là bạn đã làm thay đổi các lệnh ở đầu ra ! Tất cả các công đoạn này đều do máy tính thực hiện , và bạn có thể quay lại giá trị ban đầu nếu bạn có lưu các giá trị ban đầu như khuyến cáo ! Còn bạn nhập sai dữ liệu nó sẽ báo lỗi không nhập được ! Bạn đừng lo máy tính + phần mềm nó giải quyết mà ! Miễn là bạn hiểu đúng các chỉ dẫn ./
 

tapchoixe

Xe tải
Biển số
OF-122118
Ngày cấp bằng
26/11/11
Số km
238
Động cơ
383,680 Mã lực
Các cụ bàn về coding đọc xong em RLKN luôn. Cao siêu ngoài tầm hiểu biết của em roài.
 

Dang Vu

Xe tải
Biển số
OF-332852
Ngày cấp bằng
26/8/14
Số km
268
Động cơ
283,247 Mã lực
Bác vào chỗ này, chọn tab X1 nhé
http://www.ivini-apps.com/coding.html#tab5

Bác muốn làm cụp gương thì phải làm active ở 2 module CAS và FRM đều có phần comford folding mirror đấy:

CAS: Comfort folding/unfolding for sideview mirrors
active
not active
BMWhat: When holding the lock/unlock button on the remote the sideview mirrors automatically fold/unfold. To activate this function please activate "Comfort folding/unfolding for sideview mirrors" in the "FRM" module.

FRM: Comfort folding/unfolding for sideview mirrors
active
not active
BMWhat: When holding the lock/unlock button on the remote the sideview mirrors automatically fold/unfold. May need additional coding of the "CAS" module.

:-|:-|:-| chúc thành công....
Uầy.., em vừa mua dc cái EML 327 Mini Bluetooth =400k, nhưng cái Soft BMWhat đắt quá= 60usd, bác xem nay mai rảnh cafe chỗ nào em thử kích hoạt cái, không dùng dc thì phí quá, dt em 098 729 6699. Cảm ơn bác trước
 

lhoang

Xe đạp
Biển số
OF-23179
Ngày cấp bằng
30/10/08
Số km
29
Động cơ
493,890 Mã lực
Uầy.., em vừa mua dc cái EML 327 Mini Bluetooth =400k, nhưng cái Soft BMWhat đắt quá= 60usd, bác xem nay mai rảnh cafe chỗ nào em thử kích hoạt cái, không dùng dc thì phí quá, dt em 098 729 6699. Cảm ơn bác trước
Bác này chuẩn đới, cho tôi ké với
 
Thông tin thớt
Đang tải
Top